In order to meet the legal requirements, we give the following reference: The magnetic field therapy is scientifically disputed and by the conventional medicine it is not recognized.

The new WAVE TRANSFER C: with specific user programming!

Performance characteristics
A sound-blaster circuit was specially developed and is already built-in. The spectra are digitized with a resolution of 16 bits and a sampling frequency of 44.1 kHz. The BIOWAVES are reproduced by the “loop” technique with integrated fade algorithms! The data thus attains “CD quality“! The coded frequency spectra are stored as so-called WAVE data. These are not compressed (about 1.3 MB) and can be freely copied. This enables an exchange per E-Mail.

We guarantee very simple handling and installation!
You connect the WAVE TRANSFER C to your PC with the USB-cable supplied, install our AMScomsystem software (available as option) - and off you go!

Functions
In the INPUT you have the substrate that you want to transmit or store. In the OUTPUT you place, for example, an ampoule containing a watery substance onto which the frequency spectrum of the substrate in question is to be transferred and / or you transmit and digitally store it in your PC using the AMScomsystem software.
You can then superimpose the digitized BIOWAVES  directly onto the pulsating magnetic field of the MEDISEND® super III or MEDISEND® super C using the  AMScomsystem (available as option).
Furthermore, the WAVE TRANSFER C is equipped with a “PD“ connection (pocket device). The new METRONOM C should be connected here. In contrast to the tried and tested METRONOM solar, it is equipped with an additional storage location for BIOWAVEs which can be switched-on or off by the user as needed.

Please note! You will need two MEDICUPs if you are using the analogue mode.

Check the following links for more information: