The CEPES-Laser®Vario combines the multifunctionality of the MEDISEND®super series with the features of the CEPES-Laser®.
It can only be used if it is connected with its cable to one of the MEDISEND®super devices.
He is “the brother” of our CEPES-Laser® and thus basically has the same application possibilities.
Please also read the product description of the CEPES-Laser®.
The CEPES-Laser®Vario is connected via interface to a MEDISEND®super, MEDISEND®super C or MEDISEND®super III.
It does not have its own batteries but it is powered by the large device it is connected to. Therefore it can only be used in combination with a large device.
You find more detailed information about the MEDISEND®super devices in the menu item Large devices.
The CEPES-Laser®Vario can be connected to any of the MEDISEND®super devices and is supplied with power as soon as the large device is started. The CEPES-Laser®Vario can then be switched on with its red button. Like the CEPES-Laser®, it always emits a pulsating magnetic field simultaneously to its laser light.
However, in contrast to the CEPES-Laser® the CEPES-Laser®Vario does not have any pre-set limited selectable frequency programs. Its magnetic field always has the same frequency that is set at the connected large device. This gives the connected laser a frequency bandwidth of 0.1 - 1000 Hz and the possibility to also generate both frequency scans 100 - 1 Hz and 1000 - 1 Hz.
Any further frequency modulation that you set with the large device is also transferred to the emitted magnetic field of the CEPES-Laser®Vario.
Besides the different frequencies you can select from (amongst them the frequency 7.8 Hz, the main value of the Schumann frequency spectrum), the CEPES-Laser®Vario always also generates the Geomagnetic frequencies.
You find more information to Schumann, Geomagnetic and Solar frequencies in the menu item Environmental signals.
Furthermore, all exo- and endogenous bioinformation which are modulated on the magnetic field via the connected large device are transmitted also by the CEPES-Laser®Vario. This means that all exogenous information that has been placed in the MEDICUP as well as the endogenous (body’s own) information that are tapped by the animal applicators/hand electrodes are not only transmitted by the applicator of the large device, but also by the magnetic field of the CEPES-Laser®Vario .
Thus, during the use of a large device, you can individually enhance the application by using the CEPES-Laser®Vario.
In case you use the AMScomsystem software with digital information, the selected BIOWAVEs are also transmitted with the magnetic field.
Read more about this topic in the menu item Substrate transfer.
Like the CEPES-Laser®, the CEPES-Laser®Vario is used in the following areas:
- Acupuncture points
- Skin aras
- Trigger points
- Scars and more
is connected to an AMS large device of the MEDISEND®super family
integrates three tried-and-tested methods:
- red light laser
- pulsating electromagnetic field
- substrate transfer
transmits all settings of the connected large device
transmits analogue and digital bioinformation via the connected large device
also has an attachment with a drill to fit a glass ampule with additional bioinformation
has two settings:
- continuous light with a continuously pulsing magnetic field
- light and the magnetic field are interrupted at a frequency of 1.2 Hz (Nogier frequency)
can be used on acupuncture points, meridians, skin areas, trigger points, chakras, scars and more.
- CEPES-Laser®Vario with connecting cable
- plug-in attachment with a drill hole for the glass ampule
Here you can download the product brochure with all information as PDF file. Below you will find a link to our introductory text about magnetic field therapy and bioresonance: